Front - Mustang II Rack & Pinion IFS. We weld the cross member in on your Street Beast frame; you provide everything that "bolts in" - Upper & Lower Control Arms, Spindles, Springs, Shocks, Steering Rack (Manual or Power), Tie Rod Ends, Strut Supports, etc. '74 - '78 Mustang II is the preferred spec here.
Rear - Triangulated Four Link w/ Coil Springs. The 8.8" rear from a '79 -'94 “Fox Body” Mustang is a direct "bolt-in".
You”ll need springs and shocks, too. The correct hub-to-hub width is 59 1/2"; Fox Body 9” rear ends will also bolt right in; except Willys and Speedster. |
